Zmodell - Seite 2

Zmodell MRK-Eosakrt-pa-011 - Glass load insert for

Zmodell MRK-Eosakrt-pa-011 - Glass load insert for Märklin® type Eosakrt-pa "Von Haus zu Haus" containers (3-piece set)

Material: High-impact polystyrene (HIPS) for base, fine-grade natural bulk materials (coal, sand, crushed gravel, glass, wood shavings etc.).

Base thickness: 5 mm

Weight: 3 x 0.3&plusm;0.05 g, 0.9&plusm;0.15 g total

Quantity: 3 pieces (1 set for 1 car)

Suitable for: Märklin® 82329

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 8,00 EUR UVP 8,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-KLMS440-001 - Ladegut ohne Wagen

Zmodell MRK-KLMS440-001 - Ladegut ohne Wagen

Coal load insert for Märklin® type Klms 440 2-axle flatcar

Material: Photo-etched nickel silver for base, natural bulk materials (coal, sand, crushed gravel, glass, metal shavings etc.) or natural wooden twigs and planks for load.

Base thickness: 0.3 mm

Weight: 2.3 +/-0.1 g

Suitable for: Märklin® 8103, 8140, 8610, 8657, 8664, 8665, 8776, 81433, 81782, 82517, 86571, 98101

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 5,00 EUR UVP 5,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-KLMS440-003 - Ladegut ohne Wagen

Zmodell MRK-KLMS440-003 - Ladegut ohne Wagen

Gray gravel load insert for Märklin® type Klms 440 2-axle flatcar

Material: Photo-etched nickel silver for base, natural bulk materials (coal, sand, crushed gravel, glass, metal shavings etc.) or natural wooden twigs and planks for load.

Base thickness: 0.3 mm

Weight: 2.3 +/-0.1 g

Suitable for: Märklin® 8103, 8140, 8610, 8657, 8664, 8665, 8776, 81433, 81782, 82517, 86571, 98101

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 5,00 EUR UVP 5,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-KLMS440-004 - Ladegut ohne Wagen

Zmodell MRK-KLMS440-004 - Ladegut ohne Wagen

Brown gravel load insert for Märklin® type Klms 440 2-axle flatcar

Material: Photo-etched nickel silver for base, natural bulk materials (coal, sand, crushed gravel, glass, metal shavings etc.) or natural wooden twigs and planks for load.

Base thickness: 0.3 mm

Weight: 2.3 +/-0.1 g

Suitable for: Märklin® 8103, 8140, 8610, 8657, 8664, 8665, 8776, 81433, 81782, 82517, 86571, 98101

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 5,00 EUR UVP 5,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-KLMS440-005 - Ladegut ohne Wagen

Zmodell MRK-KLMS440-005 - Ladegut ohne Wagen

Sand load insert for Märklin® type Klms 440 2-axle flatcar

Material: Photo-etched nickel silver for base, natural bulk materials (coal, sand, crushed gravel, glass, metal shavings etc.) or natural wooden twigs and planks for load.

Base thickness: 0.3 mm

Weight: 2.3 +/-0.1 g

Suitable for: Märklin® 8103, 8140, 8610, 8657, 8664, 8665, 8776, 81433, 81782, 82517, 86571, 98101

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 5,00 EUR UVP 5,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-KLMS440-013 - Ladegut ohne Wagen

Zmodell MRK-KLMS440-013 - Ladegut ohne Wagen

Lumber load insert for Märklin® type Klms 440 2-axle flatcar

Material: Photo-etched nickel silver for base, natural bulk materials (coal, sand, crushed gravel, glass, metal shavings etc.) or natural wooden twigs and planks for load.

Base thickness: 0.3 mm

Weight: 2.1&plusm;0.1 g

Suitable for: Märklin® 8103, 8140, 8610, 8657, 8664, 8665, 8776, 81433, 81782, 82517, 86571, 98101

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 9,00 EUR UVP 9,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SNPS-006 - Wood load insert for Märkli

Zmodell MRK-SNPS-006 - Wood load insert for Märklin® type SNPS 4-axle stake car

Wood load insert for Märklin® type SNPS 4-axle

stake car

Material: Natural wooden twigs fastened with

etched nickel silver stripes airbrushed with lacquer

paint

Weight: 5&plusm;0.5 g

Suitable for: Märklin® 8226, 8655, 81098-21,

81410, 81861, 82500, 82516, 82599, 86551,

86552, 98107

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 9,00 EUR UVP 9,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SNPS-013 - Lumber load insert for Märk

Zmodell MRK-SNPS-013 - Lumber load insert for Märklin® type SNPS 4-axle stake car

Lumber load insert for Märklin® type SNPS 4-

axle stake car

Material: Natural wooden twigs fastened with

etched nickel silver stripes airbrushed with lacquer

paint

Weight: 7.2&plusm;0.5 g

Suitable for: Märklin® 8226, 8655, 81098-21,

81410, 81861, 82500, 82516, 82599, 86551,

86552, 98107

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 8,00 EUR UVP 8,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SNPS-014A - Load insert for Märklin® t

Zmodell MRK-SNPS-014A - Load insert for Märklin® type SNPS 4-axle stake car, type A

Material: 304 stainless steel airbrushed inside and outside, painted photo-etched nickel silver straps, veneer racks

Weight: 11.25&plusm;0.25 g

Suitable for: Märklin® 8226, 8655, 81098-21, 81410, 81861, 82500, 82516, 82599, 86551, 86552, 98107

Wooden bottom anti-slip supports prevent the load insert from sliding during motion.

Verfügbarkeit auf Anfrage

auf Anfrage

Ihr Preis 12,00 EUR UVP 12,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SNPS-014B - Load insert for Märklin® t

Zmodell MRK-SNPS-014B - Load insert for Märklin® type SNPS 4-axle stake car, type B

Material: 304 stainless steel airbrushed inside and outside, painted photo-etched nickel silver straps, veneer racks

Weight: 11.25&plusm;0.25 g

Suitable for: Märklin® 8226, 8655, 81098-21, 81410, 81861, 82500, 82516, 82599, 86551, 86552, 98107

Wooden bottom anti-slip supports prevent the load insert from sliding during motion.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 12,00 EUR UVP 12,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SNPS-014C - Load insert for Märklin® t

Zmodell MRK-SNPS-014C - Load insert for Märklin® type SNPS 4-axle stake car, type C

Material: 304 stainless steel airbrushed inside and outside, painted photo-etched nickel silver straps, veneer racks

Weight: 11.25&plusm;0.25 g

Suitable for: Märklin® 8226, 8655, 81098-21, 81410, 81861, 82500, 82516, 82599, 86551, 86552, 98107

Wooden bottom anti-slip supports prevent the load insert from sliding during motion.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 12,00 EUR UVP 12,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SNPS-014D - Load insert for Märklin® t

Zmodell MRK-SNPS-014D - Load insert for Märklin® type SNPS 4-axle stake car, type D

Material: 304 stainless steel airbrushed inside and outside, painted photo-etched nickel silver straps, veneer racks

Weight: 8.2&plusm;0.2 g

Suitable for: Märklin® 8226, 8655, 81098-21, 81410, 81861, 82500, 82516, 82599, 86551, 86552, 98107

Wooden bottom anti-slip supports prevent the load insert from sliding during motion.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 12,00 EUR UVP 12,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SNPS-014E - Load insert for Märklin® t

Zmodell MRK-SNPS-014E - Load insert for Märklin® type SNPS 4-axle stake car, type E

Material: 304 stainless steel airbrushed inside and outside, painted photo-etched nickel silver straps, veneer racks

Weight: 8.2&plusm;0.2 g

Suitable for: Märklin® 8226, 8655, 81098-21, 81410, 81861, 82500, 82516, 82599, 86551, 86552, 98107

Wooden bottom anti-slip supports prevent the load insert from sliding during motion.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 12,00 EUR UVP 12,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SNPS-014F - Load insert for Märklin® t

Zmodell MRK-SNPS-014F - Load insert for Märklin® type SNPS 4-axle stake car, type F

Material: 304 stainless steel airbrushed inside and outside, painted photo-etched nickel silver straps, veneer racks

Weight: 8.2&plusm;0.2 g

Suitable for: Märklin® 8226, 8655, 81098-21, 81410, 81861, 82500, 82516, 82599, 86551, 86552, 98107

Wooden bottom anti-slip supports prevent the load insert from sliding during motion.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 12,00 EUR UVP 12,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SSW07-006 - Wood load insert for Märkl

Zmodell MRK-SSW07-006 - Wood load insert for Märklin® type DRG SSml/DB SSw 07 4-axle flatcar

Material: Natural wooden twigs tied with darkened photo-etched nickel silver chains

Weight: 2.5&plusm;0.1 g

Quantity: 1 piece

Suitable for: Märklin® 82570, 82571, 82572

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 9,00 EUR UVP 9,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SSW07-013 - Lumber load insert for Mär

Zmodell MRK-SSW07-013 - Lumber load insert for Märklin® type DRG SSml/DB SSw 07 4-axle flatcar

Material: Natural wooden planks tied with darkened photo-etched nickel silver chains

Weight: 0.7&plusm;0.1 g (one piece; 1.4&plusm;0.2 g in total for the set of two pieces)

Quantity: 2 pieces (1 set for 1 flatcar)

Suitable for: Märklin® 82570, 82571, 82572

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 9,00 EUR UVP 9,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SSW07-014 - Pipes load insert for Märk

Zmodell MRK-SSW07-014 - Pipes load insert for Märklin® type DRG SSml/DB SSw 07 4-axle flatcar

Material: Thin wall (0.15 mm) brass tubes airbrushed and weathered inside and outside, dark photo-etched nickel silver chains, veneer crossbars

Weight: 7&plusm;0.2 g

Quantity: 1 piece

Suitable for: Märklin® 82570, 82571, 82572

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 12,00 EUR UVP 12,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SSY45-016 - Steel coils load insert fo

Zmodell MRK-SSY45-016 - Steel coils load insert for type SSy 45 heavy duty flatcar

Steel coils load insert for type SSy 45 heavy duty flatcar

High quality realistic load inserts for heavy duty flatcars are made entirely of metal. The base framework is made of 0.3 mm nickel silver with many intricate half-etched details, assembled using PCB hot air soldering technology and airbrushed with lacquer paint. Coils are made of real 0.1 mm thick stainless steel wounded into reels and fixed with thin nickel silver ties; they are also airbrushed with iron dye and underwent special treatment to receive natural brushed texture

The load insert features black plastic plates on both sides with prototypical micro printing. Product comes in a special cardboard box for additional safety.

Weight: 8.3&plusm;0.2 g

Suitable for: Märklin® 82228, 82229

Verfügbarkeit auf Anfrage

auf Anfrage

Ihr Preis 25,00 EUR UVP 25,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SSYM46-016 - Steel coils load insert f

Zmodell MRK-SSYM46-016 - Steel coils load insert for type SSym 46 heavy duty flatcar

Steel coils load insert for type SSym 46 heavy duty flatcar

High quality realistic load inserts for heavy duty flatcars are made entirely of metal. The base framework is made of 0.3 mm nickel silver with many intricate half-etched details, assembled using PCB hot air soldering technology and airbrushed with lacquer paint. Coils are made of real 0.1 mm thick stainless steel wounded into reels and fixed with thin nickel silver ties; they are also airbrushed with iron dye and underwent special treatment to receive natural brushed texture.

The load insert features black plastic plates on both sides with prototypical micro printing. Product comes in a special cardboard box for additional safety.

Weight: 11&plusm;0.2 g

Suitable for: Märklin® 80018, 80722, 80814, 81098-08, 81351, 82341, 82342, 82343, 82349, 82350, 82351, 82352, 82353, 82354, 82355, 82356, 82357, 82358, 82359, 82510, 82517, 82702, 86582, 89796, 98109

Verfügbarkeit auf Anfrage

auf Anfrage

Ihr Preis 28,00 EUR UVP 28,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SW-001 - Load insert for Märklin® 4-ax

Zmodell MRK-SW-001 - Load insert for Märklin® 4-axle crude iron ladle car

Load insert for Märklin® 4-axle crude iron ladle car

Material: High-impact polystyrene (HIPS), fine grade sand stabilized with glue. Real photo of molten iron printed directly onto the load insert using UV-cured printing technology.

Base thickness: 3 mm

Weight: 0.4&plusm;0.05 g

Installation: Carefully adjust the load insert in the horizontal position with hand or tweezers if needed. Don't push the load insert inside too strongly, otherwise it can get stuck in the ladle.

Removal: Remove the load insert by gentle shaking the ladle upside down, either with a help of a needle or sharp tweezers.

Suitable for: Märklin® 86210, 86211, 86213

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 5,00 EUR UVP 5,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MRK-SW-002 - Load insert for Märklin® 4-ax

Zmodell MRK-SW-002 - Load insert for Märklin® 4-axle slag car

Load insert for Märklin® 4-axle slag car

Material: High-impact polystyrene (HIPS), fine grade sand stabilized with glue. Real photo of molten slag printed directly onto the load insert using UV-cured printing technology.

Base thickness: 3 mm

Weight: 0.3&plusm;0.05 g

Installation: Carefully adjust the load insert in the horizontal position with hand or tweezers if needed. Don't push the load insert inside too strongly, otherwise it can get stuck in the ladle.

Removal: Remove the load insert by gentle shaking the ladle upside down, either with a help of a needle or sharp tweezers.

Suitable for: Märklin® 86210, 86212, 86214

Verfügbarkeit auf Anfrage

auf Anfrage

Ihr Preis 5,00 EUR UVP 5,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MS-021 - Heavy-Duty Chains

Zmodell MS-021 - Heavy-Duty Chains

Fine-scale heavy-duty chains feature exceptional level of details containing half-etched elements and providing true-to-scale dimensions.

Length: 50.5 mm (including end rings)

Width: 0.5 mm (excluding end rings)

Quantity: 10 pieces

Material: 0.15 mm photo-etched MN19 copper-nickel alloy

Suitable for: N and Z scale layouts and dioramas etc.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 7,00 EUR UVP 7,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MS-022 - “ÖBB” Austrian Federal Railways S

Zmodell MS-022 - "ÖBB" Austrian Federal Railways Signboard

Quantity: 1 pc

Material: 0.3 mm etched brass airbrushed and printed using UV-printing technology

Suitable for: Z and N scale models of railway station buildings etc.

Installation instructions

1. Carefully cut out the sign from the frame using small scissors or sharp modeling pliers.

2. Drill mounting holes using 0.7 mm drill bit.

3. Install signboard and fix it with small drops of glue from the bottom side of the drilled surface.

The size of the signboard is 24 x 14.7 mm (without frame).

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 10,00 EUR UVP 10,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell MW-001– Additional weights for GG-1 US el

Zmodell MW-001- Additional weights for GG-1 US el

Additional weight inserts for GG-1 US electric locomotive

Material: 5 mm CNC laser cut stainless steel

Quantity: 2 pieces (1 set for 1 locomotive)

Weight: 2x 8 +/-0.5 g (16 +/-1 g in total)

Suitable for: Märklin® 88490, 88491, 88492

This upgrade kit increases the weight of Märklin GG-1 electric locomotive from 38 to 54 +/-1 grams, which results in doubling the tractive effort and improving the power pickup. Weight inserts come painted in black for better look and electric insulation. For easy installation, they have adhesive tape applied to the bottom side. Detailed installation instructions included.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 12,00 EUR UVP 12,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell PL-111 – Driver’s cab interior for BR 111

Z modell PL-111 - Driver's cab interior for BR 111 electric locomotive (2-piece set)

Driver's cabin interior reproduction for Marklin® BR 111 electric locomotives

Material: scored plastic self-adhesive label

Quantity: 2 pieces (1 set for 1 locomotive)

Suitable for: Märklin® 8842, 8843, 8855, 88421, 88422, 88551, 8101, 8105, 8111, 8155, 81551, 81870

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 2,00 EUR UVP 2,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell PL-120 – Driver’s cab interior for BR 120

Zmodell PL-120 - Driver's cab interior for BR 120

Driver's cabin interior reproduction for Marklin® BR 120 electric locomotives

Material: scored plastic self-adhesive label

Quantity: 2 pieces (1 set for 1 locomotive)

Suitable for: Märklin® 8835, 8848, 8853, 88480, 88526, 88527, 88530, 88531, 88532, 88533, 88534, 88535, 88536, 81861

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 2,00 EUR UVP 2,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell SC-001 - Schleifkontakte

Zmodell SC-001 - Schleifkontakte

Sliding contacts for Märklin® IV-VI Era 4-axle passenger and baggage cars

Material: High-flexible brass 0.05 mm

Quantity: 2 pieces (1 set for 1 passenger car)

Suitable for: Most types of modern IV-VI Era 4-axle Märklin® passenger and baggage cars

Attention: Installation of this product requires drilling and soldering. Please follow the installation instructions on the package.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 3,00 EUR UVP 3,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell SC-001S - Stainless steel sliding contacts

Zmodell SC-001S - Stainless steel sliding contacts for Märklin® 4-axle passenger cars

Quantity: 2 pieces (1 set)

Material: High-flexible stainless steel 0.025 mm

Suitable for: Most types of Märklin® 4-axle passenger cars

- Stainless steel sliding contacts provide significantly better electric contact with the wheelsets in comparison with more common brass parts due to lack of oxidation.

- Reduced material thickness provides less rolling resistance while maintaining the same material strength compared to thicker brass parts.

ATTENTION: Special flux required for soldering these parts! Phosphoric acid (or "soldering acid") recommended for this purpose. Any other flux suitable for soldering steel parts can be used too.

IMPORTANT: Thorough cleaning the parts from residues of phosphoric acid (or any other acid-based fluxes) after soldering is imperative! Tap water either 100% IPA (Isopropyl Alcohol) can be used for this.

Please see installation instructions in "Downloads" tab.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 3,50 EUR UVP 3,50 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell SC-002 - Schleifkontakte

Sliding contacts for Märklin® Henschel-Wegmann 4-axle passenger cars

Material: High-flexible brass 0.05 mm

Quantity: 2 pieces (1 set for 1 passenger car)

Suitable for: Märklin® 81436, 81176

Attention: Installation of this product requires drilling and soldering. Please follow the installation instructions on the package.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 3,50 EUR UVP 3,50 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell SC-003 - Schleifkontakte

Zmodell SC-003 - Schleifkontakte

Sliding contacts for Märklin® 3-axle Donnerbüchse passenger cars and Prussian passenger and baggage cars

Material: High-flexible brass 0.05 mm

Quantity: 2 pieces (1 set for 1 passenger or baggage car)

Suitable for: Märklin® 8104, 8703, 8704, 8705, 8706, 8707, 8708, 8776, 81191, 81306, 87055, 87060, 87062, 87040, 87041, 87071, 87073, 87506, 87761

Attention: Installation of this product requires soldering. Please follow the installation instructions on the package.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 4,00 EUR UVP 4,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell SC-004 - Schleifkontakte

Sliding contacts for Märklin® 2-axle Donnerbüchse passenger cars

Material: High-flexible brass 0.05 mm

Quantity: 2 pieces (1 set for 1 passenger car)

Suitable for: Märklin® 8750, 8751, 8776, 81416, 81417, 81871, 81770, 87505, 87507, 87508, 87509, 98104

Attention: Installation of this product requires soldering. Please follow the installation instructions on the package

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 4,00 EUR UVP 4,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell SC-012 - Schleifkontakte

Brass sliding contacts for Märklin® 2-axle type Pwgs 41 freight train baggage car

Package contents:

- 2x sliding contacts, brass 0.05 mm

- 1x weight insert (0.8 g), brass 0.5 mm

- 1x holder, black polystyrene 0.5 mm

Suitable for: Märklin® 86061, 86070

Please follow installation instructions inside supplied booklet. It can also be downloaded on the Downloads tab on this product page.

Attention: Installation requires soldering.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 8,00 EUR UVP 8,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell UNI-006 - Block of stacked wooden trunks

Zmodell UNI-006 - Block of stacked wooden trunks

High quality block of stacked wooden trunks tied with metal straps in Z scale 1:220.

Quantity: 1 piece

Material: Natural wood, photo-etched nickel silver 0.15 mm.

Size: 20 x 11 x 8 mm (L x W x H), tolerance 0.5 mm

Weight: 0.8 &plusm; 0.2 g

Suitable: As a load for many types of Z scale trucks, as well as for furnishing dioramas, layouts etc.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 4,00 EUR UVP 4,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell UNI-013 - Block of stacked construction wo

Zmodell UNI-013 - Block of stacked construction wood

High quality block of stacked construction wooden planks tied with textile straps in Z scale 1:220.

Quantity: 1 piece

Material: Natural wood, synthetic rope.

Size: 20 x 10 x 7 mm (L x W x H), tolerance 0.2 mm

Weight: 0.4 &plusm; 0.1 g

Suitable: As a load for many types of Z scale trucks, as well as for furnishing dioramas, layouts etc.

Verfügbarkeit auf Lager

auf Lager

Ihr Preis 4,50 EUR UVP 4,50 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell UNI-019A - Wooden Crate Era III-IV Type A

Zmodell UNI-019A - Wooden Crate Era III-IV Type A

Quantity: 1 piece

Weight: 1.8&plusm;0.2 g

Material: CNC processed foamed PVC, natural wood veneer, craft paper, synthetic rope.

Installation: Wooden crate features mounts from double-sided self-adhesive foam at the bottom side. They allow precise and reliable fixing the load on the flatcar or semi-trailer truck and can be used multiple times. Protective film should be carefully removed with tweezers before installation.

List of compatible models

Type SSym 46 heavy duty flatcar: Märklin 80018, 80722, 80814, 81098-08, 81351, 82341, 82342, 82343, 82349, 82350, 82351, 82352, 82353, 82354, 82355, 82356, 82357, 82358, 82359, 82510, 82517, 82702, 86582, 89796, 98109

Type SSy 45/Rlmmp 700 heavy duty flatcar: Märklin 82228, 82229

Type Rmms 33 stake car/Klms 3430 low side car: Märklin 80830, 81341, 81772, 82130, 82131, 82132, 82133, 82268, 87761

Type R 10 stake car: Märklin 8144, 8217, 8658, 8664, 80002, 80421, 80727, 80816, 81302, 81423, 81433, 82100, 82101, 82102, 82103, 82515, 82518, 82572, 86000, 86580

Type Klms 440 low side car: Märklin 8103, 8134, 8140, 8610, 8657, 8664, 8665, 8776, 81098-06, 81428, 81433, 81782, 82517, 86571, 86572, 98101

Type Lgis flatcar: Märklin 80812, 81098-11, 81098-13, 81431, 81432, 81861, 81862, 82283, 82285, 82360, 82361, 82362, 82363, 82364, 82365, 82366, 82367, 82368, 82395, 82503, 82506, 82663, 82665, 98062

Type Res stake car: Märklin 80726, 81071, 81320, 81351, 81410, 81451, 82422, 82423, 82424, 82425, 82517, 82580, 82581, 82582, 82583, 82584, 82585, 86683

Type Sgs flatcar: Märklin 81431, 81432, 82660, 82661, 82662, 82663, 82665

Type SSml/SSw 07 flatcar: Märklin 82570, 82571, 82572

Semi-trailer trucks from Märklin, NOCH, Herpa.

Verfügbarkeit auf Anfrage

auf Anfrage

Ihr Preis 12,00 EUR UVP 12,00 EUR

inkl. 19 % MwSt. zzgl. Versandkosten

Zmodell UNI-019B - Wooden Crate Era III-IV Type B

Zmodell UNI-019B - Wooden Crate Era III-IV Type B