Zubehör
Z modell MS-017 - Square manhole covers with ornament
Square manhole covers with ornament
Quantity: 10 pieces
Size: 4.5 x 4.5 mm
Material: 0.1 mm photo-etched nickel silver airbrushed with "Dark Iron" lacquer paint
NOTE: For fixing manhole on layouts, Faller® Expert Lasercut glue (Art. No. 170494) or similar is recommended. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit 
auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell MS-018 - Round manhole covers with ornament
Round manhole covers with ornament
Quantity: 10 pieces
Size: Ø 4 mm
Material: 0.1 mm photo-etched nickel silver airbrushed with "Dark Iron" lacquer paint
NOTE: For fixing manhole on layouts, Faller® Expert Lasercut glue (Art. No. 170494) or similar is recommended. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell MS-019 - Solar Panels (3-Pack Set)
Solar Panels (3-Pack Set)
Quantity: 3 pieces
Material: 0.3 mm photo-etched nickel silver airbrushed with silver lacquer paint. Photovoltaic cells are printed directly onto the surface using UVprinting technology.
Note: Solar panels can be assembled manually, without the help of any tools. Please follow assembly and installation instructions in the supplied booklet.
Information: 5x2 template for drilling mounting holes in the base of layout can be found inside supplied booklet. Printable version of bigger template (12x8) can be downloaded here (A4 size, PDF):
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 12,00 EUR
UVP 12,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell MW-002 - Weight insert for Märklin transformer car
Weight insert for Märklin transformer car
High quality lasercut stainless steel weight insert improves driving characteristics of the Märklin transformer car and prevents it from derailments on tough track sections like turnouts, crossovers and S-curves within long train consists.
Quantity: 1 piece (for 1 car)
Material: CNC lasercut stainless steel 4 mm airbrushed with black lacquer paint
Weight: 15 &plusm; 0.25 g
Suitable for: Märklin® 8620, 8688, 8689, 8690, 8691, 8692
Installation instructions
1. Carefully remove the central section (transformer) from the framework of transformer car by pushing it upwards.
2. Insert the weight into the transformer from the bottom side.
3. Install the transformer back onto the framework of the car (hold the car upside down; push the transformer until you hear the 'click').
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 5,00 EUR
UVP 5,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell PL-143 - Driver's cabin interior for BR 143
Driver's cabin interior reproduction for Marklin® BR 143 electric locomotives
Material: scored plastic self-adhesive label
Quantity: 2 pieces (1 set for 1 locomotive)
Suitable for: Märklin® 88431,88432, 88433, 88435, 88436, 88437, 88438, 81424, 81444
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 2,00 EUR
UVP 2,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell WG-001 - Window glazing for Märklin transformer car
Window glazing for Märklin transformer car
High quality window inserts allow refreshing the look of Märklin transformer car and making it closer to modern quality standards. Windows feature realistic frames already separately attached to the outer side.
Quantity: 4 pieces (for 1 transformer car)
Material: CNC processed acrylic plastic 1 mm, 0.1 mm photo-etched nickel silver airbrushed with silver paint
Suitable for: Märklin® 8620, 8688, 8689, 8690, 8691, 8692
Installation instructions
1. Carefully remove two blue control cabins.
2. Apply a small drop of glue (for plastic either lasercut) to the base of the window inserts.
3. Carefully install them into the openings of the control cabins from inside using tweezers.
4. Install both control cabins back onto the car.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 12,00 EUR
UVP 12,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell WG-002 - Window glazing set for BR 78 steam locomotive
Quantity: 2 pieces (for 1 locomotive)
Material: CNC cut acrylic plastic 1.5 mm
Suitable for: Märklin® 8806, 8814, 81191, 88061, 88062, 88063, 88067
Installation instructions
1. Carefully remove the locomotive body.
2. Apply a small drop of glue (for plastic either lasercut) to the base of the window inserts.
3. Carefully install them into the openings of the smallest side windows from inside using tweezers (the base should be pointed downwards).
4. Wait until the glue dries and reassemble the locomotive.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 3,50 EUR
UVP 3,50 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell WG-003 - Window glazing set for bi-level passenger car
Quantity: 2 pieces (1 set for 1 car)
Material: CNC cut acrylic plastic 1 mm, painted photo-etched nickel silver 0.1 mm, adhesive
Suitable for: Märklin® 81413, 81444, 81481, 87290, 87291, 87292, 87293, 87295, 87296, 87297, 87298, 87299
Installation instructions
1. Carefully separate the housing of the passenger car from the chassis
2. Remove two pieces of protective film from the both sides of window insert
3. Pick window insert with sharp tweezers and carefully install it into the opening of the end door of the car body from inside. Gently press window insert from inside with cotton bud.
4. Reinstall the car body back onto the chassis.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell WG-004 - Window glazing for bi-level control car
Quantity: 1 piece (for 1 car)
Material: CNC cut acrylic plastic 1 mm, painted photo-etched nickel silver 0.1 mm, adhesive
Suitable for: Märklin® 81413, 81444, 81481, 87290, 87291, 87292, 87293, 87295, 87296, 87297, 87298, 87299
Installation instructions
1. Carefully separate the housing of the passenger car from the chassis
2. Remove two pieces of protective film from the both sides of window insert
3. Pick window insert with sharp tweezers and carefully install it into the opening of the end door of the car body from inside. Gently press window insert from inside with cotton bud.
4. Reinstall the car body back onto the chassis.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 3,50 EUR
UVP 3,50 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell WG-005 - Windows glazing set for BR 38 steam locomotive
Quantity: 2 pieces (for 1 locomotive)
Material: CNC cut acrylic plastic 1.5 mm
Suitable for: Märklin® 8130, 8899, 81302, 81428, 81437, 88991, 88993, 88994, 88997, 88998, 88999
Installation instructions
1. Carefully remove the locomotive body.
2. Apply a small drop of glue (for plastic either lasercut) to the base of the window inserts.
3. Carefully install them into the openings of the smallest side windows from inside using tweezers (the base should be pointed downwards).
4. Wait until the glue dries and reassemble the locomotive.
Important: Märklin® 88993 steam locomotive is manufactured using different technology that has higher dimensional tolerances. Installation of these windows inserts into this locomotive in some cases can be more difficult.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 3,50 EUR
UVP 3,50 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-001 - "HAUPTBAHNHOF" signboard
"HAUPTBAHNHOF" signboard
Material: Photo-etched nickel-silver 0.3 mm, painted in white
Quantity: 1 piece
Suitable for: Kibri® 6700 "Bad Neuheim, Kibri® 36704 "Friedrichstal", Faller® 2712 "Neustadt" and others.
Note: Use 0.7-0.8 mm drill bit for drilling mounting holes.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 10,00 EUR
UVP 10,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-002 - "InterCity Hotel" color signboard
"InterCity Hotel"® signboard kit
Made of thick 0.3 mm etched brass and painted in two colors - red and white. Special stencil for precise installation of letters comes in the package.
Material: Painted brass/copper/neusilber 0.3 mm
Suitable for model building by Luetke Modellbahn:
www.luetke-modellbahn.de and others.
Installation instructions
1. Use supplied stencil for precise positioning of letters (attach it to
the surface with masking tape)
2. Carefully cut out each letter from the sprue
3. Use non-destructive glue for attaching letters to the surface (for example, Faller® 170494 Expert Lasercut)
Verfügbarkeit 
auf Anfrage
auf Anfrage
Ihr Preis 16,00 EUR
UVP 16,01 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-003 - V-VI Era Deutsche Bahn logos set
Material: Photo-etched copper 0.3 mm, painted in white and printed using UV-printing technology
Quantity:
5 mm x 3.5 mm - 2 pcs
4 mm x 2.8 mm - 2 pcs
3 mm x 2.1 mm - 3 pcs
2 mm x 1.4 mm - 4 pcs
Suitable for: Railway stations, buildings, urban infrastructure elements etc.
Attention: For attaching logos to the surface, acrylic double-sided adhesive tape or non-destructive glue is recommended (for example, Faller® 170494 Expert Lasercut)
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-004 - Replacement for grill barriers in type G 10 livestock cars
Material: Photo-etched nickel silver 0.3 mmm airbrushed with lacquer coating
Quantity: 2 pieces (for 1 type G 10 car)
Suitable for: Märklin® 86602 set
Attention: This product is intended only for experienced users! Complete disassembly of G 10 car is required to install this upgrade kit. To maintain all small etched elements, these parts were airbrushed with a thin layer of lacquer paint. Please handle and install them very carefully in order not to make any scratches. For easy installation, double-sided acrylic adhesive
tape already applied. Please remove protective film before installation.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,50 EUR
UVP 7,50 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-005 - set of 0.15 mm high quality nickel silver brass stripes
Nickel silver stripes set #1
Material: Nickel silver (CuNi19) alloy
Thickness: 0.15 mm
Size: 95 mm usable length without frame
Width: 5x 0.2 mm, 5x 0.3 mm, 5x 0.4 mm, 5x 0.5 mm, 5x 0.6 mm
High quality CuNi19 alloy features better flexibility and durability in comparison with classic Cu65Ni15Zn20 (nickel silver) alloy. CuNi19 alloy is less brittle, better withstands deformations like bending, twisting etc. Together with excellent solderability using even a standard rosin flux and beautiful stainless steel-like look, it is an excellent choice for model making hobbyists.
contains 5x 0.2 mm, 5x 0.3 mm, 5x 0.4 mm, 5x 0.5 mm, 5x 0.6 mm stripes
Usable length of all strips is 95 mm
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-006 - set of 0.15 mm high quality nickel silver brass stripes
Nickel silver stripes set #2
Material: Nickel silver (CuNi19) alloy
Thickness: 0.15 mm
Size: 95 mm usable length without frame
Width: 5x 0.7 mm, 5x 0.8 mm, 5x 0.9 mm, 5x 1.0 mm
High quality CuNi19 alloy features better flexibility and durability in comparison with classic Cu65Ni15Zn20 (nickel silver) alloy. CuNi19 alloy is less brittle, better withstands deformations like bending, twisting etc. Together with excellent solderability using even a standard rosin flux and beautiful stainless steel-like look, it is an excellent choice for model making hobbyists.
contains 5x 0.7 mm, 5x 0.8 mm, 5x 0.9 mm and 5x 1.0 mm.
Usable length of all strips is 95 mm
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-007 - Etched metal III-IV Era Deutsche Bahn logos
Etched metal III-IV Era Deutsche Bahn logos
Size: 2.35 x 1.75 mm
Quantity: 4 pieces (for 1 locomotive)
Material: Photo-etched 0.15 mm CuNi19 alloy
Two logos are curved; they should be attached to the cabin sides of the locomotive. Two other logos are flat; they should be applied to the sidewalls of the locomotive.
Suitable for: III-IV Era Märklin® Z scale locomotives (Classes 103, E 10 with standard (not "Crease") design, etc.)
Partially suitable for: all class E 10 electric locomotives with "Crease" (or Bügelfalte) design. Only two flat logos can be used for sidewalls of these locomotives.
Known minor issues: Original printed logos on DB E03 004 electric locomotive (Märklin 88541) are bigger and do not covered completely (approx. by 0.1 mm at the edges; BR 103 001-4 from Märklin 88175 set has logos with standard size and is compatible with this kit).
ATTENTION: Use only non-desctructive glue, such as Faller® Expert Lasercut glue (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not allowed, as they damage the locomotive.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 6,00 EUR
UVP 6,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-008 - Crowd control barriers
Quantity: 9 pieces
Material: 0.2 mm photo-etched nickel silver coated with flat aluminum lacquer paint Barrier sections can be connected together and form a continuous chain.
ATTENTION: For fixing barriers on layouts, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-009 - Crowd control barriers with warning stripes
Quantity: 9 pieces
Material: 0.2 mm photo-etched nickel silver coated with flat aluminum lacquer paint and printed using digital UV-printing technology. Barrier sections can be connected together and form a continuous chain.
ATTENTION: For fixing barriers on layouts, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 8,00 EUR
UVP 8,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-010 - Temporary pedestrian walkway bridge
Quantity: 1 piece
Material: 0.2 mm photo-etched nickel silver with double-sided flat aluminum lacquer paint coating The bridge can be connected with other temporary barrier elements (Art. No. ZM-MS-008, ZM-MS- 009, ZM-MS-011).
IMPORTANT: Special bending tool for metal photo etched parts required for assembly of this model!
ATTENTION: For fixing the bridge on layout, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 4,50 EUR
UVP 4,50 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-011 - Double temporary pedestrian walkway bridge
Quantity: 1 piece
Material: 0.2 mm photo-etched nickel silver with double-sided flat aluminum lacquer paint coating The bridge can be connected with other temporary barrier elements (Art. No. ZM-MS-008, ZM-MS-009, ZM-MS-010).
IMPORTANT: Special bending tool for metal photo etched parts required for assembly of this model!
ATTENTION: For fixing the bridge on layout, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 6,00 EUR
UVP 6,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-012 - Metal sliding doors for type PWG baggage car
Quantity: 2 pieces
Material: 0.3 mm photo-etched and preformed
copper
Suitable for: Märklin® 81302, 86090 etc.
Information: Due to a big number of possible color
variants, the doors come unpainted. Painting
should be made by user. It can be done manually
using paintbrush either airbrushed. For best
results, airbrushing using thinned quick drying
semi-gloss lacquer paint is recommended (Tamiya,
Revell etc.)
Important: For installation of the sliding doors,
upper guiding rails should be carefully removed. It
is recommended to paint them into the matching
color together with sliding doors.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 5,00 EUR
UVP 5,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-013 - Metal sliding doors with windows for type PWG baggage car
Quantity: 2x sliding doors + set of grilled windows
(12 pcs)
Material: 0.3 mm photo-etched and preformed
copper
Suitable for: Märklin® 8130, 8609, 81860, 81864,
82321, 82504, 82523 etc.
Information: Due to a big number of possible color
variants, the doors come unpainted. Painting
should be made by user. It can be done manually
using paintbrush either airbrushed. For best
results, airbrushing using thinned quick drying
semi-gloss lacquer paint is recommended (Tamiya,
Revell etc.)
After painting sliding doors, grilled windows should
be applied from the rear side of the doors and fixed
using Faller® Expert Lasercut (Art. No. 170494) or
similar glue.
Important: For installation of the sliding doors,
upper guiding rails should be carefully removed. It
is recommended to paint them into the
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-014 - Metal sliding doors for type G10 freight car
Quantity: 2 pieces
Material: 0.3 mm photo-etched and preformed copper
Suitable for: Märklin® 8602, 8145, 8639, 80011, 81417, 82321, 86602, 86604 and other type G10 freight cars with sliding doors.
Information: Due to a big number of possible color variants, the doors come unpainted. Painting should be made by user. It can be done manually using paintbrush either airbrushed. For best results, airbrushing using thinned quick drying semi-gloss lacquer paint is recommended (Tamiya, Revell etc.)
Important: For installation of the sliding doors, upper guiding rails should be carefully removed. It is recommended to paint them into the matching color together with sliding doors.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 5,00 EUR
UVP 5,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-015 - Swiss railway station signboard "SBB CFF FFS", type 1
Quantity: 1 piece
Material: Etched copper 0.3 mm, airbrushed with
lacquer paint and printed using UV-printing
technology
Suitable for: Kibri® 6700 "Bad Neuheim, Kibri®
36704 "Friedrichstal", Faller® 2712 "Neustadt" and
others.
Installation instructions
1. Carefully cut out from the frame using small
scissors or sharp modeling pliers.
2. Drill mounting holes using 0.7 mm drill bit
(drilling map included in the package).
3. Install signboard and fix it with small drops of
glue from the bottom side of the drilled surface.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 10,00 EUR
UVP 10,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-016 - Swiss railway station signboard "SBB CFF FFS", type 2
Quantity: 1 piece
Material: Etched copper 0.3 mm, airbrushed with
lacquer paint and printed using UV-printing
technology
Suitable for: Railway station buildings, platforms
with canopy etc.
Installation instructions
1. Carefully cut out from the frame using small
scissors or sharp modeling pliers.
2. Drill mounting holes using 0.7 mm drill bit
(drilling map included in the package).
3. Install signboard and fix it with small drops of
glue.
Note: Plastic and CA glues are not recommended,
as they can damage painted coating. Faller®
Expert Lasercut glue (Art. No. 170494) or similar is
recommended.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 10,00 EUR
UVP 10,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-020 - covers for Märklin coupler boxes (10 pieces)
Replacement for Märklin coupler box cover
Quantity: 10 pieces
Material: 0.1 mm photo-etched stainless steel
Suitable for: Märklin® Z scale type Y25 trucks and others
Info: For disassembling the coupler, use thin soldering tip heated up to 200-220 °C. In order to install coupler box covers, it is necessary to restore cylindrical form of three pins on the bottom of the coupler box that hold this cover.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MD-001 - Bremsscheiben
Set of brake disks for Marklin® TRAXX locomotives and compatibles
Material: Nickel silver 0.15 mm
Quantity: 32 pieces (for 4 locomotives)
Suitable for: Märklin® 81481, 81800, 88370, 88371, 88481, 88482, 88483, 88484, 88485, 88486, 88487, 88520, 88521, 88522, 88523, 88524, 88191, 88192, 88193, 88194, 88195
Attention: Faller® Expert Lasercut glue (Art. No. 170494) or similar is recommended. Using polystyrene or cyanoacrylate glues not recommended,
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 17,00 EUR
UVP 17,01 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MD-002 - Bremsscheiben
Set of brake disks for Marklin® Siemens ER20 diesel locomotives
Material: Nickel silver 0.15 mm
Quantity: 32 pieces (for 4 locomotives)
Suitable for: Märklin® 81881, 88880, 88881, 88882, 88883, 88884
Attention: Faller® Expert Lasercut glue (Art. No. 170494) or similar is recommended. Using polystyrene or cyanoacrylate glues is not recommended, as they can damage painted areas on brake disks.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 17,00 EUR
UVP 17,01 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MD-003 - Bremsscheiben
Set of brake disks for Marklin® ICE 3 high speed train set
Material: Nickel silver 0.15 mm
Quantity: 32 pieces (for 4 ICE 3 cars)
Suitable for: Märklin® 87711, 87712, 87713, 87714, 87715, 87716, 88712, 88713, 88714, 88715
Attention: Faller® Expert Lasercut glue (Art. No. 170494) or similar is recommended. Using polystyrene or cyanoacrylate glues is not recommended, as they can damage painted areas on brake disks.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 16,00 EUR
UVP 16,01 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MD-004 - Felgen
Set of wheel rims for Z scale trucks and buses
Material: Nickel silver 0.15 mm
Quantity: 32 pieces
Suitable for:
- NOCH buses
- Kibri freight vehicles kits
- Herpa Mercedes Actros trucks
- Marklin/NOCH trucks and others
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 14,00 EUR
UVP 13,99 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MD-005 - Wheel disks for "Taurus" electric locomotives (DB BR 182, ÖBB 1016)
Material: Painted nickel silver 0.2 mm
Quantity: 8 pieces (for 1 locomotive)
Suitable for: Märklin® 81351, 81431, 81432, 88580, 88581, 88583, 88584, 88585, 88586, 88587
Attention: Faller® Expert Lasercut glue (Art. No. 170494) or similar is recommended. Using polystyrene or cyanoacrylate glues not recommended, as they can damage painted coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 8,00 EUR
UVP 8,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MD-006 - Set of brake disks for Vectron electric locomotives
Set of brake disks for Vectron electric locomotives
Quantity: 8 pieces (for 1 locomotive)
Material: Painted nickel silver 0.15 mm
Suitable for: Märklin® 88231, 88232, 88233, 88234, 88236, 88237
ATTENTION: For fixing brake disks on wheelsets, Faller® Expert Lasercut glue (Art. No. 170494) or similar recommended. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 8,00 EUR
UVP 8,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MD-007 - Brake disks for Freudenreich SJ RCx electric locomotives
The brake disks produced using new circular polishing technology that provides higher quality and more realistic look.
Quantity: 8 pieces (for 1 locomotive)
Material: Painted CuNi19 alloy 0.15 mm
Suitable for: Freudenreich SJ RCx electric locomotives
Attention: For fixing brake disks on wheelsets, Faller® Expert Lasercut glue (Art. No. 170494) or similar recommended. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 8,00 EUR
UVP 8,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MS-021 - Heavy-Duty Chains
Fine-scale heavy-duty chains feature exceptional level of details containing half-etched elements and providing true-to-scale dimensions.
Length: 50.5 mm (including end rings)
Width: 0.5 mm (excluding end rings)
Quantity: 10 pieces
Material: 0.15 mm photo-etched MN19 copper-nickel alloy
Suitable for: N and Z scale layouts and dioramas etc.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MS-022 - "ÖBB" Austrian Federal Railways Signboard
Quantity: 1 pc
Material: 0.3 mm etched brass airbrushed and printed using UV-printing technology
Suitable for: Z and N scale models of railway station buildings etc.
Installation instructions
1. Carefully cut out the sign from the frame using small scissors or sharp modeling pliers.
2. Drill mounting holes using 0.7 mm drill bit.
3. Install signboard and fix it with small drops of glue from the bottom side of the drilled surface.
The size of the signboard is 24 x 14.7 mm (without frame).
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 10,00 EUR
UVP 10,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MW-001- Additional weights for GG-1 US el
Additional weight inserts for GG-1 US electric locomotive
Material: 5 mm CNC laser cut stainless steel
Quantity: 2 pieces (1 set for 1 locomotive)
Weight: 2x 8 +/-0.5 g (16 +/-1 g in total)
Suitable for: Märklin® 88490, 88491, 88492
This upgrade kit increases the weight of Märklin GG-1 electric locomotive from 38 to 54 +/-1 grams, which results in doubling the tractive effort and improving the power pickup. Weight inserts come painted in black for better look and electric insulation. For easy installation, they have adhesive tape applied to the bottom side. Detailed installation instructions included.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 12,00 EUR
UVP 12,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell PL-111 - Driver's cab interior for BR 111 electric locomotive (2-piece set)
Driver's cabin interior reproduction for Marklin® BR 111 electric locomotives
Material: scored plastic self-adhesive label
Quantity: 2 pieces (1 set for 1 locomotive)
Suitable for: Märklin® 8842, 8843, 8855, 88421, 88422, 88551, 8101, 8105, 8111, 8155, 81551, 81870
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 2,00 EUR
UVP 2,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell PL-120 - Driver's cab interior for BR 120
Driver's cabin interior reproduction for Marklin® BR 120 electric locomotives
Material: scored plastic self-adhesive label
Quantity: 2 pieces (1 set for 1 locomotive)
Suitable for: Märklin® 8835, 8848, 8853, 88480, 88526, 88527, 88530, 88531, 88532, 88533, 88534, 88535, 88536, 81861
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 2,00 EUR
UVP 2,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-001 - Schleifkontakte
Sliding contacts for Märklin® IV-VI Era 4-axle passenger and baggage cars
Material: High-flexible brass 0.05 mm
Quantity: 2 pieces (1 set for 1 passenger car)
Suitable for: Most types of modern IV-VI Era 4-axle Märklin® passenger and baggage cars
Attention: Installation of this product requires drilling and soldering. Please follow the installation instructions on the package.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 3,00 EUR
UVP 3,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-001S - Stainless steel sliding contacts for Märklin® 4-axle passenger cars
Quantity: 2 pieces (1 set)
Material: High-flexible stainless steel 0.025 mm
Suitable for: Most types of Märklin® 4-axle passenger cars
- Stainless steel sliding contacts provide significantly better electric contact with the wheelsets in comparison with more common brass parts due to lack of oxidation.
- Reduced material thickness provides less rolling resistance while maintaining the same material strength compared to thicker brass parts.
ATTENTION: Special flux required for soldering these parts! Phosphoric acid (or "soldering acid") recommended for this purpose. Any other flux suitable for soldering steel parts can be used too.
IMPORTANT: Thorough cleaning the parts from residues of phosphoric acid (or any other acid-based fluxes) after soldering is imperative! Tap water either 100% IPA (Isopropyl Alcohol) can be used for this.
Please see installation instructions in "Downloads" tab.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 3,50 EUR
UVP 3,50 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-002 - Schleifkontakte
Sliding contacts for Märklin® Henschel-Wegmann 4-axle passenger cars
Material: High-flexible brass 0.05 mm
Quantity: 2 pieces (1 set for 1 passenger car)
Suitable for: Märklin® 81436, 81176
Attention: Installation of this product requires drilling and soldering. Please follow the installation instructions on the package.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 3,50 EUR
UVP 3,50 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-003 - Schleifkontakte
Sliding contacts for Märklin® 3-axle Donnerbüchse passenger cars and Prussian passenger and baggage cars
Material: High-flexible brass 0.05 mm
Quantity: 2 pieces (1 set for 1 passenger or baggage car)
Suitable for: Märklin® 8104, 8703, 8704, 8705, 8706, 8707, 8708, 8776, 81191, 81306, 87055, 87060, 87062, 87040, 87041, 87071, 87073, 87506, 87761
Attention: Installation of this product requires soldering. Please follow the installation instructions on the package.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 4,00 EUR
UVP 4,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-004 - Schleifkontakte
Sliding contacts for Märklin® 2-axle Donnerbüchse passenger cars
Material: High-flexible brass 0.05 mm
Quantity: 2 pieces (1 set for 1 passenger car)
Suitable for: Märklin® 8750, 8751, 8776, 81416, 81417, 81871, 81770, 87505, 87507, 87508, 87509, 98104
Attention: Installation of this product requires soldering. Please follow the installation instructions on the package
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 4,00 EUR
UVP 4,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-005 - Schleifkontakte
Sliding contacts for Märklin® 2-axle Donnerbüchse baggage car
Material: High-flexible brass 0.05 mm
Quantity: 2 pieces (1 set for 1 baggage car)
Suitable for: Märklin® 8752, 81871, 87505, 87507, 87508, 87509
Attention: Installation of this product requires soldering. Please follow the installation instructions on the package.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 4,00 EUR
UVP 4,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-006 - Schleifkontakte
Sliding contacts for Märklin® 2-axle Württemberg passenger cars
Material: High-flexible brass 0.05 mm
Quantity: 2 pieces (1 set for 1 passenger car)
Suitable for: Märklin® 8103, 8700, 8701, 8739, 81390, 81420, 81563, 82101, 87001, 87002, 87009, 98031
Attention: Installation of this product requires soldering. Please follow the installation instructions on the package.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 4,00 EUR
UVP 4,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-007 - Schleifkontakte
Sliding contacts for Märklin® 2-axle type Pwg, G 10 and other compatible freight cars
Material: High-flexible brass 0.05 mm, black highimpact polystyrene (HIPS) 1 mm
Quantity: 2 wipers, 1 holder (1 set for 1 car)
Suitable for: Märklin® 8609, 80823, 80824, 80825, 81302, 81390, 81860, 81863, 81864, 82321, 82338, 82504, 82505, 82507, 82515, 82523, 86090, 86393, 86394, 86395, 86396, 86397, 86398, 86581, 86582, 86601, 86602, 86603, 86604, 86618, 86619 and other articles based on the same chassis
Attention: Installation of this product requires soldering. Please follow the installation instructions on the package.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-011 - Schleifkontakte
Sliding contacts for Märklin® 4-axle "Langenschwalbach" design passenger cars and 4-axle American old-timer passenger cars
Material: High-flexible brass 0.05 mm
Quantity: 2 pieces (1 set for 1 passenger car)
Suitable for: Märklin® 8119, 8768, 81419, 81438, 87681, 87910, 87911
Attention: Installation of this product requires drilling and soldering. Please follow the installation instructions on the package.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 3,00 EUR
UVP 3,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-012 - Schleifkontakte
Brass sliding contacts for Märklin® 2-axle type Pwgs 41 freight train baggage car
Package contents:
- 2x sliding contacts, brass 0.05 mm
- 1x weight insert (0.8 g), brass 0.5 mm
- 1x holder, black polystyrene 0.5 mm
Suitable for: Märklin® 86061, 86070
Please follow installation instructions inside supplied booklet. It can also be downloaded on the Downloads tab on this product page.
Attention: Installation requires soldering.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 8,00 EUR
UVP 8,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Kategorien
Schnellkauf
Willkommen zurück!
Hersteller
Versandland
Zahlungsmethoden
1zu220-Shop.de © 2024 | Template © 2009-2024 by modified eCommerce Shopsoftware