Z modell ZM-MS-011 - Double temporary pedestrian w

Z modell ZM-MS-011 - Double temporary pedestrian w
Für eine größere Ansicht klicken Sie auf das Vorschaubild
Ihr Preis 6,00 EUR UVP 6,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
In den Warenkorb

Verfügbarkeit auf Lager auf Lager
Art.Nr.: ZM-MS-011
HAN: MS-011
Hersteller: Zmodell
Mehr Artikel von: Zmodell
Für weitere Informationen besuchen Sie bitte die Homepage zu diesem Artikel.



  • Details
  • Mehr Bilder
  • Kunden-Tipp

Produktbeschreibung

Z modell ZM-MS-011 - Double temporary pedestrian walkway bridge
 
Quantity: 1 piece
Material: 0.2 mm photo-etched nickel silver with double-sided flat aluminum lacquer paint coating The bridge can be connected with other temporary barrier elements (Art. No. ZM-MS-008, ZM-MS-009, ZM-MS-010).
 
IMPORTANT: Special bending tool for metal photo etched parts required for assembly of this model!
 
ATTENTION: For fixing the bridge on layout, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.

Kunden, die diesen Artikel kauften, haben auch folgende Artikel bestellt:

Z modell ZM-MS-006 - set of 0.15 mm high quality nickel silver brass stripes
 
Nickel silver stripes set #2
 
Material: Nickel silver (CuNi19) alloy
Thickness: 0.15 mm
Size: 95 mm usable length without frame
Width: 5x 0.7 mm, 5x 0.8 mm, 5x 0.9 mm, 5x 1.0 mm
 
High quality CuNi19 alloy features better flexibility and durability in comparison with classic Cu65Ni15Zn20 (nickel silver) alloy. CuNi19 alloy is less brittle, better withstands deformations like bending, twisting etc. Together with excellent solderability using even a standard rosin flux and beautiful stainless steel-like look, it is an excellent choice for model making hobbyists.
 
contains 5x 0.7 mm, 5x 0.8 mm, 5x 0.9 mm and 5x 1.0 mm.
 
Usable length of all strips is 95 mm
Verfügbarkeit auf Lagerauf Lager
Ihr Preis 7,00 EUR UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-008 - Crowd control barriers
 
Quantity: 9 pieces
 
Material: 0.2 mm photo-etched nickel silver coated with flat aluminum lacquer paint Barrier sections can be connected together and form a continuous chain.
 
ATTENTION: For fixing barriers on layouts, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lagerauf Lager
Ihr Preis 7,00 EUR UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-009 - Crowd control barriers with warning stripes
 
Quantity: 9 pieces
 
Material: 0.2 mm photo-etched nickel silver coated with flat aluminum lacquer paint and printed using digital UV-printing technology. Barrier sections can be connected together and form a continuous chain.
 
ATTENTION: For fixing barriers on layouts, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lagerauf Lager
Ihr Preis 8,00 EUR UVP 8,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-002 - "InterCity Hotel" color signboard
 
"InterCity Hotel signboard kit
 
Made of thick 0.3 mm etched brass and painted in two colors - red and white. Special stencil for precise installation of letters comes in the package.
 
Material: Painted brass/copper/neusilber 0.3 mm
Suitable for model building by Luetke Modellbahn:
 
Installation instructions
1. Use supplied stencil for precise positioning of letters (attach it to
the surface with masking tape)
2. Carefully cut out each letter from the sprue
3. Use non-destructive glue for attaching letters to the surface (for example, Faller® 170494 Expert Lasercut)
Verfügbarkeit auf Anfrageauf Anfrage
Ihr Preis 16,00 EUR UVP 16,01 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-005 - set of 0.15 mm high quality nickel silver brass stripes
 
Nickel silver stripes set #1
 
Material: Nickel silver (CuNi19) alloy
Thickness: 0.15 mm
Size: 95 mm usable length without frame
Width: 5x 0.2 mm, 5x 0.3 mm, 5x 0.4 mm, 5x 0.5 mm, 5x 0.6 mm
 
High quality CuNi19 alloy features better flexibility and durability in comparison with classic Cu65Ni15Zn20 (nickel silver) alloy. CuNi19 alloy is less brittle, better withstands deformations like bending, twisting etc. Together with excellent solderability using even a standard rosin flux and beautiful stainless steel-like look, it is an excellent choice for model making hobbyists.
 
contains 5x 0.2 mm, 5x 0.3 mm, 5x 0.4 mm, 5x 0.5 mm, 5x 0.6 mm stripes
 
Usable length of all strips is 95 mm
Verfügbarkeit auf Lagerauf Lager
Ihr Preis 7,00 EUR UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-007 - Etched metal III-IV Era Deutsche Bahn logos
 
Etched metal III-IV Era Deutsche Bahn logos
 
Size: 2.35 x 1.75 mm
Quantity: 4 pieces (for 1 locomotive)
Material: Photo-etched 0.15 mm CuNi19 alloy
Two logos are curved; they should be attached to the cabin sides of the locomotive. Two other logos are flat; they should be applied to the sidewalls of the locomotive.
 
Suitable for: III-IV Era Märklin® Z scale locomotives (Classes 103, E 10 with standard (not "Crease") design, etc.)
Partially suitable for: all class E 10 electric locomotives with "Crease" (or Bügelfalte) design. Only two flat logos can be used for sidewalls of these locomotives.
Known minor issues: Original printed logos on DB E03 004 electric locomotive (Märklin 88541) are bigger and do not covered completely (approx. by 0.1 mm at the edges; BR 103 001-4 from Märklin 88175 set has logos with standard size and is compatible with this kit).
 
ATTENTION: Use only non-desctructive glue, such as Faller® Expert Lasercut glue (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not allowed, as they damage the locomotive.
Verfügbarkeit auf Lagerauf Lager
Ihr Preis 6,00 EUR UVP 6,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-010 - Temporary pedestrian walkway bridge
 
Quantity: 1 piece
 
Material: 0.2 mm photo-etched nickel silver with double-sided flat aluminum lacquer paint coating The bridge can be connected with other temporary barrier elements (Art. No. ZM-MS-008, ZM-MS- 009, ZM-MS-011).
 
IMPORTANT: Special bending tool for metal photo etched parts required for assembly of this model!
 
ATTENTION: For fixing the bridge on layout, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lagerauf Lager
Ihr Preis 4,50 EUR UVP 4,50 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-014 - Metal sliding doors for type G10 freight car
 
Quantity: 2 pieces
 
Material: 0.3 mm photo-etched and preformed copper
 
Suitable for: Märklin® 8602, 8145, 8639, 80011, 81417, 82321, 86602, 86604 and other type G10 freight cars with sliding doors.
 
Information: Due to a big number of possible color variants, the doors come unpainted. Painting should be made by user. It can be done manually using paintbrush either airbrushed. For best results, airbrushing using thinned quick drying semi-gloss lacquer paint is recommended (Tamiya, Revell etc.)
 
Important: For installation of the sliding doors, upper guiding rails should be carefully removed. It is recommended to paint them into the matching color together with sliding doors.
Verfügbarkeit auf Lagerauf Lager
Ihr Preis 5,00 EUR UVP 5,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-013 - Metal sliding doors with windows for type PWG baggage car
 
Quantity: 2x sliding doors + set of grilled windows
(12 pcs)
Material: 0.3 mm photo-etched and preformed
copper
Suitable for: Märklin® 8130, 8609, 81860, 81864,
82321, 82504, 82523 etc.
Information: Due to a big number of possible color
variants, the doors come unpainted. Painting
should be made by user. It can be done manually
using paintbrush either airbrushed. For best
results, airbrushing using thinned quick drying
semi-gloss lacquer paint is recommended (Tamiya,
Revell etc.)
After painting sliding doors, grilled windows should
be applied from the rear side of the doors and fixed
using Faller® Expert Lasercut (Art. No. 170494) or
similar glue.
Important: For installation of the sliding doors,
upper guiding rails should be carefully removed. It
is recommended to paint them into the
Verfügbarkeit auf Lagerauf Lager
Ihr Preis 7,00 EUR UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
ArchiStories 426070-LY - Single Garage Kit - Light Yellow
Verfügbarkeit auf Lagerauf Lager
Ihr Preis 21,00 EUR UVP 21,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten

Diesen Artikel haben wir am 18.05.2021 in unseren Katalog aufgenommen.

Übersicht   |   Artikel 21 von 49 in dieser Kategorie « Erster   |   « vorheriger   |   nächster »   |   Letzter »
Schnellkauf

Bitte geben Sie die Artikelnummer aus unserem Katalog ein.

Willkommen zurück!
Hersteller
Zmodell
Versandland