- Details
- Mehr Bilder
- Kunden-Tipp
Produktbeschreibung
Zmodell MD-004 - Felgen
Set of wheel rims for Z scale trucks and buses
Material: Nickel silver 0.15 mm
Quantity: 32 pieces
Suitable for:
- NOCH buses
- Kibri freight vehicles kits
- Herpa Mercedes Actros trucks
- Marklin/NOCH trucks and others
Kunden, die diesen Artikel kauften, haben auch folgende Artikel bestellt:
AZAR models W03-WA3 - 4-achsige Planenhaubenwagen WASCOSA - 3 teilig
Verfügbarkeit 
auf Lager
auf Lager
119,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Minichamps D22905221 - 1-AXLE TRAILER W/OPEN FLATBED
Maßstab: 1:220
Material: Resin
Dieses Modell ist für Kinder unter 14 Jahren nicht geeignet
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 10,95 EUR
UVP 10,95 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-008 - Crowd control barriers
Quantity: 9 pieces
Material: 0.2 mm photo-etched nickel silver coated with flat aluminum lacquer paint Barrier sections can be connected together and form a continuous chain.
ATTENTION: For fixing barriers on layouts, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-009 - Crowd control barriers with warning stripes
Quantity: 9 pieces
Material: 0.2 mm photo-etched nickel silver coated with flat aluminum lacquer paint and printed using digital UV-printing technology. Barrier sections can be connected together and form a continuous chain.
ATTENTION: For fixing barriers on layouts, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 8,00 EUR
UVP 8,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-010 - Temporary pedestrian walkway bridge
Quantity: 1 piece
Material: 0.2 mm photo-etched nickel silver with double-sided flat aluminum lacquer paint coating The bridge can be connected with other temporary barrier elements (Art. No. ZM-MS-008, ZM-MS- 009, ZM-MS-011).
IMPORTANT: Special bending tool for metal photo etched parts required for assembly of this model!
ATTENTION: For fixing the bridge on layout, use non-destructive glue, such as Faller® Expert Lasercut (Art. No. 170494) or similar. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 4,50 EUR
UVP 4,50 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MD-001 - Bremsscheiben
Set of brake disks for Marklin® TRAXX locomotives and compatibles
Material: Nickel silver 0.15 mm
Quantity: 32 pieces (for 4 locomotives)
Suitable for: Märklin® 81481, 81800, 88370, 88371, 88481, 88482, 88483, 88484, 88485, 88486, 88487, 88520, 88521, 88522, 88523, 88524, 88191, 88192, 88193, 88194, 88195
Attention: Faller® Expert Lasercut glue (Art. No. 170494) or similar is recommended. Using polystyrene or cyanoacrylate glues not recommended,
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 17,00 EUR
UVP 17,01 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell MD-006 - Set of brake disks for Vectron electric locomotives
Set of brake disks for Vectron electric locomotives
Quantity: 8 pieces (for 1 locomotive)
Material: Painted nickel silver 0.15 mm
Suitable for: Märklin® 88231, 88232, 88233, 88234, 88236, 88237
ATTENTION: For fixing brake disks on wheelsets, Faller® Expert Lasercut glue (Art. No. 170494) or similar recommended. Using polystyrene or cyanoacrylate glues not recommended, as they can damage paint coating.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 8,00 EUR
UVP 8,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Zmodell SC-001S - Stainless steel sliding contacts for Märklin® 4-axle passenger cars
Quantity: 2 pieces (1 set)
Material: High-flexible stainless steel 0.025 mm
Suitable for: Most types of Märklin® 4-axle passenger cars
- Stainless steel sliding contacts provide significantly better electric contact with the wheelsets in comparison with more common brass parts due to lack of oxidation.
- Reduced material thickness provides less rolling resistance while maintaining the same material strength compared to thicker brass parts.
ATTENTION: Special flux required for soldering these parts! Phosphoric acid (or "soldering acid") recommended for this purpose. Any other flux suitable for soldering steel parts can be used too.
IMPORTANT: Thorough cleaning the parts from residues of phosphoric acid (or any other acid-based fluxes) after soldering is imperative! Tap water either 100% IPA (Isopropyl Alcohol) can be used for this.
Please see installation instructions in "Downloads" tab.
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 3,50 EUR
UVP 3,50 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-005 - set of 0.15 mm high quality nickel silver brass stripes
Nickel silver stripes set #1
Material: Nickel silver (CuNi19) alloy
Thickness: 0.15 mm
Size: 95 mm usable length without frame
Width: 5x 0.2 mm, 5x 0.3 mm, 5x 0.4 mm, 5x 0.5 mm, 5x 0.6 mm
High quality CuNi19 alloy features better flexibility and durability in comparison with classic Cu65Ni15Zn20 (nickel silver) alloy. CuNi19 alloy is less brittle, better withstands deformations like bending, twisting etc. Together with excellent solderability using even a standard rosin flux and beautiful stainless steel-like look, it is an excellent choice for model making hobbyists.
contains 5x 0.2 mm, 5x 0.3 mm, 5x 0.4 mm, 5x 0.5 mm, 5x 0.6 mm stripes
Usable length of all strips is 95 mm
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Z modell ZM-MS-006 - set of 0.15 mm high quality nickel silver brass stripes
Nickel silver stripes set #2
Material: Nickel silver (CuNi19) alloy
Thickness: 0.15 mm
Size: 95 mm usable length without frame
Width: 5x 0.7 mm, 5x 0.8 mm, 5x 0.9 mm, 5x 1.0 mm
High quality CuNi19 alloy features better flexibility and durability in comparison with classic Cu65Ni15Zn20 (nickel silver) alloy. CuNi19 alloy is less brittle, better withstands deformations like bending, twisting etc. Together with excellent solderability using even a standard rosin flux and beautiful stainless steel-like look, it is an excellent choice for model making hobbyists.
contains 5x 0.7 mm, 5x 0.8 mm, 5x 0.9 mm and 5x 1.0 mm.
Usable length of all strips is 95 mm
Verfügbarkeit auf Lager
auf Lager
Ihr Preis 7,00 EUR
UVP 7,00 EUR
inkl. 19 % MwSt. zzgl. Versandkosten
Diesen Artikel haben wir am 25.11.2020 in unseren Katalog aufgenommen.
Übersicht | Artikel 31 von 49 in dieser Kategorie
« Erster |
« vorheriger |
nächster » |
Letzter »
Kategorien
Schnellkauf
Willkommen zurück!
Hersteller
Zmodell
Versandland
Zahlungsmethoden
1zu220-Shop.de © 2024 | Template © 2009-2024 by modified eCommerce Shopsoftware